plainspeak Download

Rewrite your copy

This page shows you how to set up a rewrite, run it, and improve it in further passes.

Set the recipe

Select the Recipe button beside Rewrite. It shows your current voice, length and model, such as Recipe: practitioner · keep length · claude-sonnet-5.5. The mode is on the badge above the rewrite. In the Rewrite recipe you choose:

SettingWhat it does
ModelThe AI model that writes the rewrite. See Choose a model.
ModeHow much the model may change. See below.
VoiceWho the rewrite should sound like.
LengthKeep stays close to your length, no more than about a tenth longer. Tighten (20-40% shorter) cuts filler but never a number, name, date, price, link or quote.

Select Done to close the recipe. Your choices are kept for the next rewrite.

Choose a mode

ModeWhat it doesUse it when
PolishChanges only the tells. Your wording, sentences and paragraph breaks stay as they are.Your draft is close and you want the giveaways gone.
RewriteRebuilds every sentence in the voice you chose. Keeps the order of your points and every fact. Leaves passages that are already sharp alone.Your draft says the right things but reads as generated.
RepurposeRebuilds the piece from its meaning, as a post. It avoids reusing runs of your wording, and may change the order and structure.You want a new post from the same material.

Choose a voice

VoiceSounds like
PractitionerAn experienced practitioner: confident, specific, a little dry wit.
WarmA plain-spoken colleague talking over coffee.
DirectBlunt but human, with short, punchy sentences.
Mass audienceA columnist writing for everyone: everyday words, numbers up front, a little drama.

Mass audience changes its shape with the piece. A long read stays a long read, with its headings, order and length; only the words get simpler. A post, or any Repurpose, gets a hook up front, one-sentence paragraphs and a question to close on. PlainSpeak decides which from what kind of piece you pasted, shown on the Looks like button in the scan panel. You can correct it there.

You can edit these voices and add your own. See Edit and add voices.

Build a post with Repurpose

In Repurpose, the recipe shows Repurpose details:

Select Save current as template to keep what you set up. See Use templates for posts.

If a Repurpose comes back 80% or more unchanged, PlainSpeak tries once more before showing you the result, and keeps the second reply only if it is better. The second try is included in what the run cost.

The point of view setting is followed more closely by some models than others. On DeepSeek V4.1 Flash, first person often stays mostly "you" on a how-to piece, where MiniMax M3.1 Flash takes it. The result says when a piece misses the person you asked for.

When your source is a long-form article or a newsletter, a banner may suggest the template that usually suits it. Select Apply to use it or Dismiss to hide the suggestion.

Run the rewrite

Beside the recipe (above it in a narrow window), a short line says what Rewrite is waiting on: Paste something to rewrite, your AI key (for example Needs an OpenRouter API key), Start your free trial, Needs a licence, or Ready. When something is missing, select the line to fix it: it opens Settings on the key field, or the licence card.

  1. Select Rewrite, or press Ctrl+Enter.
  2. Watch the rewrite arrive in the Your rewrite panel. To stop it, select Cancel.

Each finished rewrite is saved as a version: v1, v2 and so on, up to the last 12. Each version is named with the model and the voice that made it. Select a version to view it; later versions are kept.

What you see while it runs

While a rewrite runs, a list of steps shows what PlainSpeak is doing. It lists only the steps that really run on this rewrite:

A step that fails is shown as failed, not hidden. If the rescan keeps your original, the list says so and why.

The result summary

When the rewrite lands, a short summary sits above the compare bar. Each line appears only when it was measured on this run:

How this was checked opens Protocol: what each number measures, and the evidence behind it.

Rewrite again

After the first rewrite, the button reads Rewrite again. It rewrites the version you are looking at, not your original, so you can build on a good version. Change your source text and the next rewrite starts from the source again. Clear versions, beside the versions, discards all of them and keeps the text in Original.

Long pieces

A piece over 750 words is rewritten in parts of up to 750 words, split between paragraphs. The status line shows which part is running. The parts appear together when the last one finishes. If one part fails, it keeps its original wording and a note tells you which. Cancelling keeps the parts already rewritten and leaves the rest as it was, and is not saved as a version.

Fix what is left

A fix pass changes only the phrases it is told about and leaves the rest of the copy alone. It is not a mode: it always works on the current copy.

The compare bar then shows output four-grams changed: the share of the fixed copy's four-word sequences that were not in the copy the fix started from. One changed word changes up to four of them, so it is not the share of words edited. Over 40% is marked too broad for a fix pass. A copy under four words is too short for four-gram comparison.

The audit is a second pass, not a required step

The scan and Fix these N are a complete path on their own. The scan finds the tells, one rewrite or fix pass changes those phrases, and no model but the one you chose reads your copy, as long as Audit with two other models is unticked and you have not audited this piece yet. A rewrite you stop there is finished, and plenty of work needs nothing more.

Run audit, and Fix N selected after it, are a second pass that you choose to run. Two models from families other than the one that wrote your rewrite read the copy again and quote what still reads as generated to them. Reach for it when you want other eyes on a piece, and leave it off when you do not. It is two more opinions on the wording rather than a verdict on the piece, and after a few rounds what is left is usually a matter of taste.

What a second pass costs on your own key, so you can judge it:

See Get a second opinion.

When PlainSpeak keeps your original

PlainSpeak checks every rewrite before showing it. If the rewrite fails a check, you see The rewrite didn't land. and your text stays exactly as it was. No version is saved. A fix pass that fails a check says The fix didn't land. and leaves your rewrite untouched. It keeps your text when:

Select Try again to run it again, or Learn more for what to do about that reason. See Troubleshooting.

What PlainSpeak tidies for you